Mouse Test

Check that all the buttons and the scroll wheel of your mouse work properly. Every click is detected and shown in real time.

  • – tests completed
Only available on desktop The mouse test requires a physical mouse. Come back on a computer to test your buttons.
Click, scroll or use the side buttons

Check every button on your mouse in a few seconds

This mouse test does one specific job: it tells you if your computer correctly detects every button and the scroll wheel on your mouse. Put the cursor inside the test area, click, roll the wheel and press the side buttons. The mouse diagram reacts to each action and shows you right away what works and what stays silent.

There is nothing to install, no driver to add and no account to create. The page works with any wired or wireless mouse connected to a computer, from a $15 office model to a $150 gaming mouse. It is the first thing to try when a click seems to get lost, when the wheel jumps around, or when you have just bought a used mouse and want to know what you paid for.

What the test detects

This mouse tester recognises the seven standard actions a web browser can read from a mouse:

  • Left click: the main button, and the one that wears out first.
  • Right click: inside the test area, the context menu is blocked so you can click freely.
  • Middle click: pressing down on the wheel, often used to open a link in a new tab.
  • Wheel up and wheel down: each scroll notch is shown separately.
  • Back side button and forward side button: the two thumb buttons that normally act as "previous page" and "next page". During the test, they do not navigate away.

Every button that gets detected lights up in blue and stays lit, so you can see at a glance what you have already checked. When you press a button you have already tested, it turns a darker shade for as long as you hold it, then goes back to blue when you let go. For the wheel, the matching arrow darkens briefly on every notch. A click sound plays on each press and a soft tick on each wheel notch, and a trail of dots follows your cursor inside the area. You can mute the sound and switch to fullscreen with the buttons in the area. To reset the diagram, just reload the page.

There is no click counter and no score here. The page is a diagnostic tool, not a speed challenge, and everything it shows you comes from what the browser actually receives from your mouse.

Step by step method

  1. Open the page on a computer. The test needs a real mouse: on a phone or tablet, a message asks you to come back from a PC.
  2. Move the cursor into the test area. Clicks made outside it are ignored.
  3. Click each button once: left, right, middle, then both side buttons. Each part of the diagram should light up.
  4. Roll the wheel slowly, one notch at a time, up and then down. Check that the correct arrow reacts every time.
  5. Click each button slowly again, about ten times, while listening to the sound. One press should give exactly one sound.
  6. Hold each button down for three or four seconds. The dark shade should stay steady until you release it.

The whole routine takes less than a minute. If a button never lights up, the problem is either the button itself or the way your mouse is configured, which is covered further down this page.

Spotting a faulty double click

The most common mouse fault is the unwanted double click: you press once and the computer receives two clicks. Files open when you only meant to select them, drag and drop lets go halfway, and in games your weapon fires twice. The cause is nearly always the switch, the small mechanical part sitting under each button. As it wears, its metal contacts start to bounce or oxidise, and a single press produces several signals.

To run a useful mouse button test, click slowly and evenly, around one click per second. Listen carefully: every press the page detects triggers one sound. If you hear two sounds close together for a single press, your switch is sending extra clicks. Do the same while holding the button down. If the dark shade flips back to plain blue while your finger has not moved, the contact is cutting out during the press. That is the other classic symptom, the one that makes you drop items halfway through a drag.

The fault is often intermittent. A tired switch can behave for twenty clicks and double on the twenty first. Repeat the mouse test over about thirty presses, and run it again at another time of day if the fault does not show up the first time. Warm rooms and long gaming sessions tend to bring it out.

Symptoms and likely causes

Symptom Likely cause What to try
Two sounds for a single click Worn or oxidised switch that bounces Raise the debounce time in the mouse software, otherwise replace the switch or claim the warranty
A held button releases on its own Unstable switch contact Same diagnosis as the double click: the switch is near the end of its life
A button never lights up Dead switch, or button remapped in the manufacturer's software Restore the default profile in the software, then test again
The wheel scrolls up when you scroll down Dirty or worn wheel encoder Compressed air under the wheel, contact cleaner, or a new encoder
Some wheel notches are ignored Tired encoder, or a scrolling setting Check your system scroll settings, then clean the wheel
Random missed clicks on a wireless mouse Low battery or receiver too far away Charge it, bring the dongle closer with a USB extension, keep it away from busy USB 3 ports

When a side button does not respond

Side buttons raise a lot of questions. On many gaming mice, the manufacturer's software (Logitech G Hub, Razer Synapse, SteelSeries GG and others) lets you assign a macro, a DPI change or a keyboard key to them. Once that happens, the mouse no longer sends a side button signal, so the browser cannot recognise it as one. Before you decide the button is broken, restore the default profile or close the software for a moment, then run the test again.

It also helps to know the limits of any test that runs in a browser. Only the five standard buttons and the vertical wheel can be read. The DPI switch button, wheel tilt left and right, and the extra buttons on 12 button MMO mice are not detected here, because the mouse itself or its software handles them. For those, use the manufacturer's own testing tool, then come back to this mouse tester to check the standard buttons once your profile is set up.

Fix it or replace it

Quick fixes

  • Try another USB port and avoid unpowered hubs. An unstable power supply can cause phantom clicks.
  • Raise the debounce time if your software offers it. Going from 2 or 4 ms to 8 or 10 ms often hides an early double click problem, at the cost of latency you will hardly notice.
  • Blow compressed air around the button and under the wheel to clear out dust.
  • Update the mouse firmware. Some manufacturers have fixed double click issues with a firmware update.

Lasting fixes

If the fault keeps coming back, the switch is worn out. Check your warranty first: most gaming mice carry a one or two year manufacturer warranty, and in the European Union the legal guarantee covers a new product for at least two years, so a mouse that double clicks after 14 months can often be swapped. Outside warranty, replacing a switch takes a soldering iron and a few dollars in parts (Omron, Kailh, TTC). Mice with optical switches, which are more and more common, barely suffer from this problem at all, because the click is detected by a beam of light rather than a metal contact.

When to run this test

  • When buying a used mouse: check every button and the wheel in front of the seller, on their computer or yours.
  • When a new mouse arrives: a factory defect shows up right away, while you can still send it back.
  • When a game or app behaves strangely: before blaming your settings, make sure the mouse is sending the right signals.
  • After a drop or a spilled drink: a damaged switch is not always visible to the naked eye.
  • Every six months on a gaming mouse you use heavily, with a slow mouse button test on the left button. Mechanical switches are often rated for 20 to 80 million clicks, but they can fail long before that.

What this test does not measure

This page checks that your buttons and wheel are detected. It does not show your mouse's real DPI, its polling rate or its latency. Those values depend on the sensor and the firmware, so check them in the manufacturer's software or with a dedicated tool. To measure how fast you click, the CPS test on this site is a better fit. Think of this page as a mouse checker: in one minute, you know if your mouse sends every click, once, at the right moment.

That makes it a good companion to the other tools rather than a replacement. If your clicks per second suddenly drop, or your aim feels off, a quick pass with the mouse checker rules out a hardware fault before you start changing sensitivity or blaming your form.

Frequently asked questions

Does the mouse test work with a wireless mouse?

Yes. Bluetooth or USB dongle, the browser sees the mouse like any other. If clicks only go missing in wireless mode, check the battery and the distance to the receiver.

Why does my right click not open a menu?

That is on purpose. The context menu is blocked inside the test area so you can right click repeatedly without interruption. Outside the area, right click works normally.

How can I tell if my mouse double clicks during a mouse button test?

Click slowly about thirty times while listening to the test sound. One press should produce one sound. Two sounds close together for a single press point to a bouncing switch.

The buttons stay lit up. Is that normal?

Yes. A detected button stays blue to show it has been tested. Reload the page to start again with a blank diagram.

Can I use this mouse tester on a phone?

No, you need a physical mouse. On a touch screen, a message tells you the test is only available on a computer.

Is this mouse checker free?

Yes. It is free, with no sign up and no download, and nothing is sent to a server.